Filter
Top Products
8-12
User's Manual
OPTIONAL DEVICES
External monitor
An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change
the display setting.
Tablet PC Pen set
Use it as a spare to your computer. Spare pen tip and draw-out tool are included.
Refer to Chapter 6, Power and Power-Up Modes, for the detailed usage.
Reserve pen
Supplied pen uses a pen instead of Supplied pen at the time of loss or breakage.
The pen is set inside the computer, which connects a battery pack. Refer to Chapter
6, Power and Power-Up Modes, for the detailed usage.