6. PROGRAMMING OPERATIONS
EO1-11110
6-19
(10) 10) When the Sub-link is a negative PLU, a Return Merchandise or Void entry through the
Head-link PLU is not possible.
11) None of Scale-Compulsory PLUs should be linked as Sub-link to another PLU of Head-
link. An error will result on the Head-link item entry attempt in this case.
12) When a price-change entry is made (using the [PR OPEN] or [OPEN] key) through the
Head-link PLU, the Sub-link PLU will always require a manual price entry even if that
PLU is a preset price type PLU.
13) PLU with the Alcoholic Beverage, Cigarette or Quantity Entry Compulsory Status
programmed cannot be used for Link-PLU.
11 Tare Table No. (for Scale-compulsory PLUs only)
| | [#]
Enter the Tare Table No. (1 to 9). The content of each Tare Table is set later in a
separate operation (Submode 26). In a scale item entry of a PLU with a Tare Table No.
set, the tare weight preset in the Tare Table will automatically be subtracted from the
total weight read from the scale. Enter 0 to cancel a Tare Table No. once set. Or skip this
address setting for PLUs not needing any tare weight calculations.
12 Individual PLU Unit Weight Table Code (for Scale-compulsory PLUs only)
| | | [#]
LB unit Kg unit
0:
General Unit Weight (set in Submode 26)
1: 1 LB 1 Kg
2: 2 LB 2 Kg
3: 3 LB 3 Kg
4: 4 LB 4 Kg
5: 5 LB 5 Kg
6: 6 LB 6 Kg
7: 7 LB 7 Kg
8: 8 LB 8 Kg
9: 9 LB 9 Kg
10: 1/2 LB 100 g
11: 1/4 LB not applicable
NOTE: Whether the ECR adopts the LB or Kg unit system is determined by a program
option selection.
Dollar Discount/Extra Charge Code
Enter the Dollar Discount/Extra Charge Code (1 to 99), then depress the [#] key. Enter 0 as
the Dollar Discount/Extra Charge Code to reset the code once programmed.
13 Mix &Match Group No.
| | | | [#]
Enter the Mix & Match Group No. (1 to 255). To cancel the Mix & Match Group once set,
enter 0.
NOTE: This Mix & Match Group No. setting is only possible when a Whole Package
Quantity (Address 8) is set.
-- Continued --
6.8 PLU TABLE PROGRAMMING (Submode 4)
Address No. Description of Programming Contents
ADDITIONAL NOTES
If a PLU is linked to a negative Department, the PLU is automatically set as negative PLU. If a PLU is linked to an
Other Income Department, the PLU is automatically set as Other Income PLU.
When a negative PLU is set with the Scale-Compulsory status, an error will result in a sale entry attempt of that
PLU.