Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11110
5-2
5.2 PROGRAMMING OPERATIONS ADDED FOR IN-LINE TERMINALS
. . .
1 to 16
(NOTES 1 & 2 below)
Repeat for other terminals to be connected, including the Master Terminal
itself. (Max. 16 terminals for the Scanning System Type or PLU Manual
Entry System Type, including the Master Terminal.)
5.2 PROGRAMMING OPERATIONS ADDED FOR IN-LINE TERMINALS
5.2.1 TERMINAL CONNECTION TABLE SETTING
(Submode 69; added for Master Terminal only)
This submode is required for in-line services. Enter the In-line ID No. and the Register No. of each terminal
(including the Master Terminal) connected to the in-line cable.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET and IN-LINE Lamp illuminated
69 [@/FOR] |In-line ID No.| [ST] |Register No.| [#] [AT/TL]
. . .
0 to 999999
(NOTE 2 below)
*
* For sequentially programming
In-line ID Nos., the In-line ID
specification can be skipped.
NOTES: 1. In-line ID No.: Master Terminal ............................................1 (fixed)
Backup Master Terminal (if connected) ........2 (fixed)
Satellite Terminals......................................... 3 to 16 (max.14 terminals)
2. The In-line ID No. and Register No. of each terminal to be set here must be the same as those
programmed for the terminal in IN-LINE TERMINAL ID SETTING (Submode 77) and STORE/
REGISTER NO. SETTING (no submode) in Chapter 6 in the Manager’s Guide for stand-alone
level.
3. To delete an individual terminal from the Terminal Connection Table, enter 0 in place of the In-
line ID No. in the above operation pattern.
4. To delete the entire Terminal Connection Table once set, operate:
69 [@/FOR] → 0 [AT/TL]
5. If a deleting operation (individual or entire deletion) is performed, the files occupied by the
deleted terminal(s) (such as Floating Cashier File, etc.) is canceled.
Therefore, a deleting operation should be performed only when the system is to be re-built or a
terminal is to be detached from the system.
ex.) To set a Master Terminal and a Satellite Terminal in the connection table
(total of two terminals in the in-line system):
Master Terminal ID No.1 Register No.111101
Satellite Terminal ID No.3 Register No.333303
Mode Lock: SET/ and IN-LINE Lamp illuminated
69 [@/FOR]
1 [ST] 111101 [#] (for the Master Terminal)
3 [ST] 333303 [#] (for the Satellite Terminal)
[AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
19-12-1994 MON #1
P69
01 #111101
03 #333303
0014 14:21TM