Filter
Top Products
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11110
10-22
10.31 SCALE ENTRY
10.31 SCALE ENTRY
OPERATION (The department or PLU through which scale items are entered must be a Scale-Allow
department or a Scale-Compulsory PLU)
(1) Auto Scale Entry (without tare/tare 2/tare 3, or with tare/tare 2/tare 3 auto-subtraction)
(M)
• Through Dept: Place the item [SCALE] |Unit Weight| [@/FOR]
• Through Dept: on the scale platter.
per Unit Weight
per Unit Weight
• Through Preset-PLU: Place the item on the ([SCALE])
scale platter. (M)
|Preset PLU Code| [PLU]
- - -
- - -
• Through Open-PLU: Place the item on the ([SCALE])
scale platter. (M)
|Open PLU Code| [PLU] |Unit Price| [AMT]
per Unit Weight
- - -
|Unit Price| [Open DEPT]
|Open-Dept Code| [DP#] |Unit Price| [AMT]
For entry with General Weight Unit
.....
1 to 9 (LB or Kg), 10 for 1/2 LB
or 100g, 11 for 1/4LB (when the
Unit Weight is different from the
General Weight Unit)
NOTES: 1. When the PLU is programmed with a Tare Table No., the tare weight is automatically subtracted
from the scaled weight, and thus only the net weight is processed.
2. If the Tare 2 rate is programmed in the PLU table, a Tare 2 entry is performed when the above
Preset/Open PLU entry is performed.
(2) Auto Scale with Tare/Tare 2/Tare 3
|Tare Table No.| [TARE] to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.
|Tare Table No.| [TARE] |Tare 2 Rate| [TARE 2] to be continued to the arrows
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.
|Tare 2 Rate| [TARE 2] to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.
|Tare Weight| [TARE 3] to be continued to the arrows marked with “(M)” in the above three
operation sequences of the Auto Scale Entry.
1 to 9
1 to 9 0 to 99.99 (%)
0 to 99.99 (%)
Any value other than 0,
however, less than the
weight of scaled item