Filter
Top Products
6. PROGRAMMING OPERATIONS
EO1-11110
6-32
6.17 PLU PRESET-CODE KEY SETTING (Submode 27)
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #3001
P26
#1 0.13LB
2LB
0037
ex.) To set the following:
Tare Table No. 1 with Tare Weight 0.13LB, General
Weight 2LB (Code 2).
Mode Lock: SET, 26 [@/FOR]
1 [ST] 13 [#] 2 [AT/TL]
NOTE: The initial value for the General Unit Weight is set to Code 1 (1LB or 1Kg).
6.17 PLU PRESET-CODE KEY SETTING (Submode 27)
When there are any keys programmed as PLU Preset-code Keys on the ECR Keyboard (Ordinary or Flat Type),
and/or when the PLU Keyboard PK-2 (hardware option) is connected to the ECR, a PLU code may be preset to
each of those keys in this operation.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
Barcode Scanning
27 [@/FOR] |PLU Code| [KEY] [AT/TL]
Enter through Numeric
Keys on the ECR Keyboard
(Enter 0 to close the key);
Max. 6 or 13 digits
Depress the required key
on the ECR Keyboard or
on the PK-2 Keyboard.
Repeat for other keys.
ex.) To set the following PLU Codes to KEYs on the ECR keyboard:
Mode Lock: SET
PLU Code 27 [@/FOR].
50321 50321 [required key]
50322 50322 [required key]
[AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #3001
P27
#073 0000000050321
#074 0000000050322
0017
Location Code (left side); refer to REMARKS 1 and 2 on the next page.
PLU Code assigned to the key (right side)