Filter
Top Products
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11110
10-17
10.19 SUB-LINK PLU ENTRY
10.19 SUB-LINK PLU ENTRY
OPERATION
When the Sub-link PLU is of Preset-PLU Type:
Head-link PLU Entry Sub-link PLU Code Entry
When the Sub-link PLU is of Open-PLU Type
|Price| [AMT]
(automatically entered)
- - -
(compulsory)
-- Receipt Print Format --
Coke Small-B $0,60TS
Small-Btl Depo↑ $0,05
Example) PLU “Coke Small-B” is programmed as
Head-link PLU and PLU “Small-Btl
Depo” is programmed as Sub-link in this
example.
- - -
- - -
in case of quantity extension
Or, scan the barcode.
[DEPT]
|Unit Price| [AMT]
|Dept Code| [DP#]
Link Department Designation
NOTES: 1. When a PLU item is successfully entered in the operation procedure above, the item is printed on
the receipt and journal. The item name at this time is the name of the Link Department. At the
same time, the PLU item is automatically added to the PLU ADDITIONAL FILE. Thus, the added
PLU item can now be entered normally on any of the terminals.
2. Since PLU items thus added to the PLU file are programmed with the name of the link
department and the “zero” status as a provisional measure, it will be a Manager’s job to change
those PLU tables with proper name and status as a PLU maintenance operation later (described
in the Manager’s Guide).
NOTE: For entering a Price of the Sub-link PLU, the [PLU Preset-code Key] cannot be used (always use the
[AMT] key in this case).
10.20 URGENT PLU MAINTENANCE
(to enter a PLU item not existing in the PLU program file)
OPERATION (Available only to an ECR with PLU expansion memory)
Error Message Depress [C]
PLU Entry Operation “CODE ERROR” to cancel the
is displayed. error status.
[PLU ADD] (|Quantity| [@/FOR]) |PLU Code| [PLU]