Filter
Top Products
3. Tests and Diagnostics
3.15 G-sensor test
NOTE: please keep 90 degree between logic upper and LCD panel when test
The display of a test program and the set method of PC are shown below.
Display of a Test Program, The portion which PC and Test-Fixture contact is green.
Set method of PC <1>
Z
Upper
X
If the picture shows as below, it means the 3D G-sensor function is OK
Test 2 :
Satellite T210/T215 Series Maintenance Manual
28
Set method of PC <2>
Rear
U
pp
e
r
90
°
Test 3:
Set Method of PC <3>
Right
U
pp
e
r
90
°
Test 4: