Filter
Top Products
3. Tests and Diagnostics
Satellite T210/T215 Series Maintenance Manual
3
3.1 The Diagnostic Test
This chapter explains how to use the Test & Diagnostic program to test the functions of the
(Base on Streamline S10 T&D version 1.0) hardware modules. The program consists of a series
of tests that run automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
CONFIG CHECK TEST
AUDIO SOUND TEST
FAN ON/OFF TEST
MAIN BATTERY CHARGE TEST
FDD TEST
MEMORY CHECK
KEYBOARD TEST
MOUSE(PAD) TEST
LCD PIXELS MODE TEST
MAGNETIC SWITCH TEST
LAN TEST
RTC TEST
G-SENSOR TEST
HDD TEST
READ DMI TEST
WRITE DMI TEST
TOSHIBA LOGO SET
DYNABOOK LOGO SET
TP TYPE R/W TEST
EE-PROM SETTING
You will need the following equipment to perform some of the Diagnostic test programs.
The diagnostics USB memory
A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
A LAN loopback