Filter
Top Products
4 Replacement Procedures 4.14 Bluetooth Module
4.10 WWAN Card
Removing the WWAN Card
Remove the WWAN card according to the following procedures and Figure 4.20.
1. Disconnect two antenna cables from the WWAN card.
2. Remove the two M2x3 screws securing the WWAN card. The card pops up automatically.
3. Remove the WWAN card at an angle of 45 degrees.
M2×3*2
Figure 4.20 Removing the WWAN card
Installing the WWAN Card
Install the WWAN card according to the following procedures.
1. Insert the WWAN card into the connector on the motherboard at an angle of 45 degrees.
2. Press the WWAN card down and secure it with two M2x3 screws.
3. Connect two antenna cables to the WWAN card. Connect the red antenna to MAIN #1 and
the blue antenna to AUX #2 on the WWAN card.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-28