Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
5. Shift the keyboard upward to expose the connectors as shown in Figure 4.11.
6. Unlock and disconnect the keyboard FCC cable from the logic upper assembly, and then
remove the keyboard.
Figure 4.11 Removing the keyboard
Installing the Keyboard
Install the keyboard according to the following procedures.
1. Connect the keyboard FCC to the logic upper assembly.
2. Seat the keyboard in the correct position and press downward until it snaps into place.
3. Close the laptop and turn it over. Secure the keyboard to the logic lower assembly with two
M2x6 screws as shown in Figure 4.8.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-19