Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
4.13 HDD Board
Removing the HDD Board
Remove the HDD board according to the following procedures and Figure 4.25:
1. Disconnect the HDD board cable from the motherboard and remove the two M2x3 screws
securing the HDD board to the logic lower assembly, as shown in Figure 4.25.
M2x3*2
Figure 4.25 Removing the HDD board
2. Remove the HDD board.
Installing the HDD Board
Install the HDD board according to the following procedure:
1. Seat the HDD board in the logic lower assembly and secure with two M2x3 screws.
2. Connect the HDD board cable to the motherboard.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-33