Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
4. Remove the two M2x3 screws securing the HDD pack to the HDD bay.
5. Pull the tab in the direction indicated in Figure 4.6 to release the HDD, and then remove the
HDD pack.
M2x3*2
Figure 4.6 Removing the HDD pack from the HDD bay
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
6. Place the HDD pack on a flat surface such as a desk.
7. Remove the four M3x3 screws in order as indicated in Figure 4.7 and separate the HDD foil
from the HDD.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-15