Filter
Top Products
4 Replacement Procedures 4.14 Bluetooth Module
4.8 Touch Pad Assembly
Removing the Touch Pad Assembly
Remove the touch pad assembly according to the following procedures and Figures 4.16, 4.17
and 4.18.
1. Turn the logic upper assembly upside down.
2. Disconnect the touch pad FFC and remove the two M2x2 and one M2x3 screws securing the
touch pad assembly to the logic upper assembly as shown in Figure 4.16.
M2x2
M2x3
M2x2
Figure 4.16 Removing the touch pad assembly screws
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-24