Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
4.7 Power Button Board
Removing the Power Button Board
Remove the power button board according to the following procedures and Figure 4.15.
1. Remove one M2x3 screw securing the power button board to the back of the logic upper
assembly.
2. Remove the power button board from the logic upper assembly.
M2x3*1
Figure 4.15 Removing the power button board
Installing the power button board
Install the power button board according to the following procedures.
1. Seat the power button board in the correct position on the back of the logic upper assembly.
2. Secure the power button board with one M2x3 screw.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-23