Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
3. Turn the laptop right side up and open it.
4. Disconnect the power board FFC, touch pad FFC and RGB board FFC.
5. Remove the two M2x3 and one M2x6 screws securing the logic upper assembly to the logic
lower assembly.
M2x3*2
M2x6*1
Figure 4.13 Disconnecting the logic upper assembly cables
6. Use your fingers to pry up the logic upper assembly from the logic lower assembly as shown
in Figure 4.14.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-21