Filter
Top Products
4.14 Bluetooth Module 4 Replacement Procedures
4.19 Speakers
Removing the Speakers
Remove the speakers according to the following procedures and Figure 4.33.
1. Peel up the tape and free the speaker cables from the channels.
2. Pry up the speakers as shown in Figure 4.33 and remove them.
Figure 4.33 Removing the speakers
Installing the Speakers
Install the speakers according to the following procedures.
1. Place the speakers in the correct position and secure them by pressing firmly downward,
without touching the speaker cones.
2. Route the speaker cables into the routing channels and replace the tape to secure them in
place.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-41