Tripp Lite 932845 Switch User Manual


 
18
7.6.3 Network
7.6.4 RADIUS Settings
TheNetworkdialogisusedtospecifytheKVMswitch’snetwork
environment.
ToallowauthorizationfortheNetDirectorConsoleKVMSwitchwithIP
AccessthroughaRADIUSserver,dothefollowing:
Check 1. Enable Radius.
Fill in the IP addresses and Service Ports for the primary and alternate 2.
RADIUSservers.
SetthetimeinsecondsthattheKVMswitchwaitsforaRADIUSserver3.
reply before it times out in the Timeout field.
SetthenumberofRADIUSretriesallowedintheRetrieseld.4.
Keythe5. Shared Secret character string that you want to use for
authenticationbetweentheKVMswitchandtheRADIUSServerinthis
field.
Note: Set the access rights for each user on the RADIUS server according
to the information in the table on the next page.
RADIUS Server Access Rights
Network Transfer Rate
SettherateatwhichtheKVMswitchtransfersdatatoremotecomputers.
Therangeisfrom8to99999Kilobytespersecond(Kbps).
IP Address
TheNetDirectorConsoleKVMSwitchwithIPAccesscaneitherhave
itsIPaddressassigneddynamically(DHCP),oritcanbegivenaxedIP
address.
For dynamic IP address assignment, select the • Obtain IP address
automatically button.
To specify a fixed IP address, select the • Set IP address manually button
and fill in the IP address, subnet mask and default gateway.
DNS Server
ForautomaticDNSServeraddressassignment,selectthe• Obtain DNS
Server address automatically button.
TospecifytheDNSServeraddressmanually,selectthe• Use the
following DNS Server button, and fill in the addresses for the primary
andalternateDNSservers.
Note: Specifying the primary DNS Server address is mandatory. The
alternate DNS Server address is optional.
Character Meaning
C
Grants the user administrator privileges, allowing the user to
configure the system.
W
Allows the user to access the system via the Windows Client
program.
J
Allows the user to access the system via the Java Client
program.
L Allows the user to access log information via a Web browser.
PN
Restricts the user from accessing specified ports on the OSD
port list.
Syntax: PN/1/2/3/4 (etc.)
PV
Limits the user to only being able to view specified ports on
the OSD port list.
Syntax: PV/1/2/3/4 (etc.)
UHK
Defines the OSD Hotkey.
UHK0: Scroll Lock + Scroll Lock
UHK1: Ctrl + Ctrl
UOL
Defines the OSD List Function.
UOL0: All
UOL1: Powered On
UOL2: Quick View
UOL3: Quick View + Powered On
UODM
Selects how the Port ID displays.
UODM0: Port Number + Port Name
UODM1: Port Number
UODM2: Port Name
UODT
Determines the length of time in seconds that the Port ID
displays on the monitor after a port change.
Syntax: UODTn (where n represents a number from 0–255)
7. Administration
(
continued
)
7.6 Administration Page
(
continued
)