Tripp Lite 932845 Switch User Manual


  Open as PDF
of 45
 
35
10.4 Port Operation
10.3.7 Help
10.3.8 Exit
10.4.1 Panel Array Mode
10.4.2 Keyboard Hotkey Operation
10. Java Client
(
continued
)
10.3 Java Client Control Panel
(
continued
)
ClickingthisbuttonbringsuptheonlinehelpscreenfortheJavaClient.
ClickingtheExitbuttonterminatestheJavaClientsession.
JavaClientportoperationisthesameasfortheWindowsClient.Seesection9.4,Port Operation, for details.
ThisisverysimilartotheWindowsClientPanelArrayMode(seesection9.4.3fordetails),exceptforsomedifferencesinthetoolbar.TheJavaClient
PanelArrayModeToolbarisdescribedinthetablebelow:
Icon Function
Pauses on the panel that has the focus at the time you click
the pause button. After you click Pause, the button changes to
an arrowhead and its caption changes to Resume. To resume
scanning, click the Resume button.
Brings the current panels focus to the first available port that
is four ports before the port you were just on.
Brings the current panels focus to the first available port
before the port you were just on.
Brings the current panels focus to the first available port after
the port you were just on.
Icon Function
Brings the current panels focus to the first available port that
is four ports after the port you were just on.
Increase the number of panels in the array. (Choose between
16, 8, 4 and 1.)
Decrease the number of panels in the array. (Choose be-
tween 16, 8, 4 and 1.)
Toggle 4/3 aspect ratio.
Exit Panel Array mode.
KeyboardhotkeyoperationisthesameasfortheWindowsClient.Seesection9.4.5,Keyboard Hotkey Operation, for details.
11.1 Log File on Remote Main Page
11. Log File
TheNetDirectorConsoleKVMSwitchwithIPAccesslogsalltheevents
that take place on it. To view the contents of the log file, click the Log icon
attheleftoftheremotemainpage;or,clickontheLogtabofthelocal
consoleOSD.Ascreensimilartotheonebelowappears:
A maximum of 512 events are stored in the log file. To clear the log file,
click on the Clear Log icon at the lower right of the screen.
Note: The Log File is a temporary file that is erased when the KVM switch is turned off or loses
power. It is recommended that you install the Log Server to back up the contents of the
log file.
 previous next