Tripp Lite 932845 Switch User Manual


  Open as PDF
of 45
 
4
1. FCC Information
2. User Notice
3. Package Contents
This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed “as
is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire
cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.
This package consists of:
• (1)B020-008-17-IPorB020-016-17-IPConsoleKVMSwitchwithIPAccess
• (2)P774-006PS/2KVMCableSets
• (1)PowerCord
• (1)CDwithOwner’sManual*
Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other devices on
the installation.
4.1 Overview
4. Introduction
TheNetDirectorConsoleKVMSwitchwithIPAccessisacontrolunit
thatallowssecureaccesstomultiplecomputersfromasingleKVM
(keyboard,video,andmouse)console.ItconsistsofanintegratedLCD
monitor,keyboard,andtouchpadina1Urack-mountablehousing.The
NetDirectorConsoleKVMSwitchwithIPAccessfeaturesdual-rail
technology. To maximize space in your data center, the keyboard/touchpad
module slides back to “hide away” when not in use, while the thin profile
LCDmonitorrotatesback–ushagainsttherack–allowingconvenient
monitoring of computer activity.
TheNetDirectorConsoleKVMSwitchwithIPAccessfeaturesIP-based
connectivity that allows multiple remote operators to concurrently monitor
the computers on your installation. It uses TCP/IP for its communications
protocol, allowing it to be accessed from any computer on the LAN, WAN,
orInternet–whetherthatcomputerislocateddownthehall,downthe
street, or halfway around the world.
Remote
Optional External Console
 previous next