19
FOR WINDOWS NT 4.0
1. Click on Start, Settings, Control Panel. Double click on
Network.
2. Select the Protocol tab, and double click on TCP/IP
Protocol.
3. When the window appears, select the correct adapter for
your network adapter. If the Obtain an IP address from a
DHCP Server is checked, this computer is ready to
communicate with the ENR1504. If it is not, proceed to step
4.
4. If there is an IP address listed, WRITE DOWN this IP
address on the memo page of this manual (page 109).
5. Select the DNS configuration tab. If there is an IP address
listed on this tab, WRITE DOWN this IP address on the
memo page of this manual (page 109).
NOTE: After you’ve configured your PC to communicate
with the ENR1504, you might need to enter these IP
addresses into the router in order to share your
Internet access through your Cable or DSL modem.
4. Select Obtain an IP address from a DHCP Server.
5. Click the OK button in the TCP/IP Properties window, and
click OK in the “Network” window.
6. Restart the computer if asked.
Repeat for each PC on your network. When all of your PCs are
configured, continue to Step 3: Basic Router Configuration on
page 21.
20
FOR WINDOWS XP
1. Click on Start, Settings. If your view is already Classic
View, proceed to step 2. Otherwise, switch your view to
Classic View by right clicking your mouse while the cursor is
over the Start button.
2. Double click on Network Connections.
3. Right click on the Local Area Connection that is associated
with the network adapter you are using, and select the
Properties option.
4. In the This connection uses the following items box,
highlight Internet Protocol (TCP/IP). Click the Properties
button. If the Obtain an IP address automatically is
checked, this computer is ready to communicate with the
ENR1504. If it is not, proceed to step 5.
5. If there is an IP address listed, WRITE DOWN this IP
address on the memo page of this manual (page 109).
6. Select the DNS configuration tab. If there is an IP address
listed on this tab, WRITE DOWN this IP address on the
memo page of this manual (page 109).
NOTE: After you’ve configured your PC to communicate
with the ENR1504, you might need to enter these IP
addresses into the router in order to share your
internet access through your Cable or DSL modem.
7. Select Obtain an IP address from a DHCP Server.
8. Click the OK button in the Internet Protocol (TCP/IP)
Properties window. Click the OK button in the Local Area
Connection Properties window.
9. Restart your computer if asked.