Filter
Top Products
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 180
Ethernet (Wired) Interface
yes
You can configure all Ethernet (Wired) set-
tings from the CLI except "Connection
Type".
To change the Connection Type from
DHCP to Static IP addressing (or vice
versa), you must use the Web User Inter-
face.
yes
Wireless Interface
yes yes
Security
yes yes
Set Up Guest Access
yes yes
Enable/Configure Guest Login Welcome Page
yes
Configuring Multiple BSSIDs on Virtual Wire-
less Networks
yes yes
Radio Settings
yes
You can configure all Radio settings from
the CLI except for turning on/off Super G.
yes
MAC Filtering
yes yes
Load Balancing
yes yes
Quality of Service
yes yes
Wireless Distribution System
yes yes
Time Protocol
yes yes
Reboot the Access Point
yes
Reset the Access Point to Factory Defaults
yes yes
Upgrade the Firmware You cannot upgrade the firmware from the
CLI. To upgrade firmware, use the Web
User Interface as described in “Upgrade”
on page 172.
yes
Backup and Restore You cannot backup or restore an access
point configuration from the CLI. To
backup or restore an access point configu-
ration, use the Web User Interface as
described in “Backup/Restore” on
page 174.
yes
Feature or Setting Configurable from CLI Configurable
from Web User
Interface