Filter
Top Products
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 214
access point. These settings correspond to those available in the Web User Interface on the Advanced
menu’s Security tab. For a detailed discussion of concepts and configuration options, see“Security” on
page 101.
This section focuses on configuring security on the Internal network. (Security on the Guest network
defaults to None. See “When to Use No Security” on page 102
.)
This table shows a quick view of Security commands and links to detailed examples.
Get the Current Security Mode
USR5453-AP#
get interface wlan0 security
none
Get Detailed Description of Current Security Settings
USR5453-AP#
get bss wlan0bssInternal detail
Field Value
---------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:0C:41:16:DF:A6
dtim-period
max-stations
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name wlan0bssInternal
radius-accounting
Security Command Example
Get the Current Security Mode
get interface wlan0 security
Get Detailed Description of Current Secu-
rity Settings
get bss wlan0bssInternal detail
get interface wlan0 detail
Set the Broadcast SSID (Allow or Prohibit)
set bss wlan0bssInternal ignore-broadcast-ssid on
set bss wlan0bssInternal ignore-broadcast-ssid off
Enable / Disable Station Isolation
Set Security to None
set interface wlan0 security plain-text
Set Security to Static WEP See detailed example in “Set Security to Static WEP” on page 216.
Set Security to IEEE 802.1x
See detailed example in“Set Security to IEEE 802.1x” on page 219.
Set Security to WPA/WPA2 Personal
(PSK)
See detailed example in “Set Security to WPA/WPA2 Personal (PSK)”
on page 221.
Set Security to WPA/WPA2 Enterprise
(RADIUS)
See detailed example in “Set Security to WPA/WPA2 Enterprise
(RADIUS)” on page 223.