Filter
Top Products
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 193
Get the IP Address for the Internal Interface on an Access Point
In the following example, the IP address for the access point is: 10.10.55.216. Use the get command as
shown to obtain the IP address for the Internal network.
USR5453-AP#
get interface br0 ip
10.10.55.216
Get the MAC Address for an Access Point
In the following example, the MAC address for the access point is: 00:a0:c9:8c:c4:7e. Use the get
command as shown to obtain the MAC address.
USR5453-AP#
get interface br0 mac
00:a0:c9:8c:c4:7e
Get Both the IP Address and MAC Address
The following command returns both the IP address and the MAC address for an access point:
USR5453-AP#
get interface br0 mac ip
Field Value
---------------------
ip 10.10.55.216
mac 00:a0:c9:8c:c4:7e
Get Common Information on All Interfaces for an Access Point
The following example shows common information (including IP addresses) for all interfaces.
USR5453-AP#
get interface
name type status mac ip mask
---------------------------------------------------------------------------
-----
lo up 00:00:00:00:00:00 127.0.0.1 255.0.0.0
eth0 up 00:02:B3:01:01:01
eth1 down 00:02:B3:02:02:02
br0 bridge up 00:02:B3:01:01:01 10.10.100.110
255.255.255.0
brguest bridge down 00:00:00:00:00:00
wlan0 service-set up 00:0C:41:16:DF:A6
wlan0guest service-set up
wlan0wds0 wds down
Set the Wireless Network Name (SSID)
set interface wlan0 ssid NewSSiD
For example:
set interface wlan0 ssid Vicky
set interface wlan0 ssid "Vicky’s AP"
Basic Setting Example