Filter
Top Products
8315 L&J Tankway Software Description TankGate Interface
52 Installation and Operations Manual
4.16 System Information (SYS)
The System Information Point lists the hardware and software specifications
of the system. Other information includes the hardware version and any
connected devices.
4.16.1 Parameters
The database parameters used by the SYS point are listed and described below:
Configuration
Parameters
Function
RTUTag
RTUTag can contain 15 bytes of data and can include any printable
ASCII character.
DBFile
The database file name. DBFile is the name of the RCF database
configuration file
DBVer
The database version
PntEnable
Disable/Enable execution of points. Default is Enable
Dynamic Parame-
ters
Function
UnitAddr
The TankGate Unit Address (SW1)
DBPnts
The number of database points defined
DBSize
The size of the database in bytes
DBChangeTime
The time of last database modification
SysVer
The Firmware version
SysCheckSum
The System Checksum
HardVer
The PCB hardware version
PSDVer
The programmable logic version
PntCheckSum
CRC-16 Checksum for point's static Configuration Parameters