Filter
Top Products
8 VISIONEER PATRIOT 680 SCANNER USER’S GUIDE
6. Plug the ADF cable into the ADF port on the back of the scanner.
Make sure the cable is plugged in securely. The ADF will not work
if the cable is loose or not plugged in.
7. Push the locking tab down to the unlocked position.
8. When you’re finished assembling the scanner, place it on a level
surface on your desk. If the scanner is on an uneven surface, it may
stall when scanning from the Flatbed.
9. Proceed to “Step 2: Install the Software.”
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but remember to unlock it before scanning. The
scanner will not scan when locked.