Filter
Top Products
CONFIGURING THE ONETOUCH BUTTONS 67
Invert Image—Only available for Black&White Mode, this
option reverses the black and whites of an image.
Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the front side of the page only.
Skip Blank Originals—Skips pages that are completely blank.
Typically you use this option when you will scan a stack of two-
sided pages which have a number of blank sides. This option is
only available for Duplex scanning.
Note: Because you can set Duplex and Simplex for the OneTouch
buttons, there could be a conflict when you press the Simplex or
Duplex button on the scanner. Regardless of the OneTouch setting,
the scanner button always takes precedence. In other words, even if the
LED number on the scanner has a setting for Duplex, when you press
the Simplex scanner button the scanner scans in Simplex mode, and
vice versa.
Original Image Inverted Image