Filter
Top Products
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 117
CREATING A NEW ADVANCED INTERFACE PROFILE
You cannot change the settings of the preset profiles in the Advanced
Interface. However you can create new profiles and save them for future
use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for
example, Black&White Configurations/Custom.
2. Adjust the settings as required and then click the Save As button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click OK. The name must be
at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.