Filter
Top Products
62 VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
at too great an angle, the image may not scan correctly. In that
case, re-scan the page using the paper guides to feed the paper in
straight.
■ Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for the
Grayscale or Color Mode at 200dpi or less.
■ Invert Image—Only available for Black&White Mode, this
option reverses the black and whites of an image.
■ Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the front side of the page only.
■ Skip Blank Originals—Skips pages that are completely blank.
Typically you use this option when you will scan a stack of two-
sided pages which have a number of blank sides. This option is
only available for Duplex scanning.
Note: Because you can set Duplex and Simplex for the OneTouch
buttons, there could be a conflict when you press the Simplex or
Duplex button on the scanner. Regardless of the OneTouch setting,
the scanner button always takes precedence. In other words, even if
the LED number on the scanner has a setting for Duplex, when you
press the Simplex scanner button the scanner scans in Simplex mode,
and vice versa.
Original Image Inverted Image