Filter
Top Products
TROUBLESHOOTING 129
STATUS LIGHT TROUBLESHOOTING CODES
A green status light indicates the normal state of the scanner.
NORMAL OPERATION
■ Blinking green: indicates the scanner is waking up from power
saving and preparing to scan.
■ Steady green: indicates the scanner is ready to scan.
ERROR CODES
If your scanner experiences hardware problems, the status light will
blink red, and the LED flashes an “E” and the error code number.
The table below describes the error codes.
The LED blinks back and forth
between “E” and the error code
number (such as 6).
The red light flashes the number
of times as the error code (6 in
this example).