Filter
Top Products
www.vxitech.com
VM4016 Programming 27
INPUT:MASK
The INPut:MASK command enables or disables input channels from generating interrupts or
recording data in the conditional register. If a channel is programmed to be ON or 1, then it is
enabled to generate interrupts. If a channel is programmed to be OFF or 0, then it cannot generate
VXIbus interrupts.
INPut:MASK <state>, <channel_list> Where <state> is 0 | OFF | 1 | ON.
Where <channel_list> is standard channel
list format supporting channels 1 through
16.
EXAMPLES
INPut:MASK ON,(@1:8) Enables channels 1 through 8 to generate
interrupts.
INPut:MASK? 3 Reports that channel 3 is enabled for
1 voltage comparison.
INP:MASK? 9 Reports that channel 9 is not enabled for
0 voltage comparison.