Filter
Top Products
www.vxitech.com
VM4016 Programming 31
INPUT:RANGE
The input range command selects the input range of one or more channels. The input range may
be either set for ±10 volts or ± 100 volts. It is important to note that the input offset is normalized
to ± 10 volt range. The actual input offset in the 100 volt range is ten times the set value.
INPut:RANGe <range>,<channel_list> Where <range> is 10 V | 100 V.
Where <channel_list> is the standard
channel list format supporting channels 1
through 16.
EXAMPLES
INPut:RANGe 100,(@1:16) Sets the input range for Channels 1 through
16 to 100 V.
INPut:RANGe? 7 Returns the input range for Channel 7 as
100 100 V.
INP:RANG 10,(@4:6) Sets the input range for Channels 4 through
6 to 10 V.
INP:RANG? 5 Returns the input range for Channel 5 as
10 10 V.