Filter
Top Products
VXI Technology, Inc.
54 VM4016 Command Dictionary
*ESR?
Purpose
Queries and clears the Standard Event Status Register
Type
IEEE 488.2 Common Command
Command Syntax
N/A
Command Parameters
N/A
*RST Value
N/A
Query Syntax
ESR?
Query Parameters
N/A
Query Response
Numeric ASCII value from 0 to 255
Description
The Event Status Register (ESR) query queries and clears the contents of the
Standard Event Status Register. This register is used in conjunction with the ESE
register to generate the Event Status Bit (ESB) in the Status Byte. The layout of the
ESR is:
Bit 0 - Operation Complete
Bit 1 - Request Control
Bit 2 - Query Error
Bit 3 - Device Dependent Error
Bit 4 - Execution Error
Bit 5 - Command Error
Bit 6 - User Request
Bit 7 - Power On
The Operation Complete bit is set when it receives an *OPC command.
The Query Error bit is set when data is over-written in the output queue. This could
occur if one query is followed by another without reading the data from the first
query.
The Execution Error bit is set when an execution error is detected. Errors that range
from -200 to -299 are execution errors.
The Command Error bit is set when a command error is detected. Errors that range
from -100 to -199 are command errors.
The Power On bit is set when the module is first powered on or after it receives a
reset via the VXI Control Register. Once the bit is cleared (by executing the *ESR?
command) it will remain cleared.
Examples Command / Query Response (Description)
*ESR? 4
Related Commands
*ESE