Filter
Top Products
Precautions on use and handling
Page 3
USAGE
HANDLING
W
ARNING
Only use the power adapter that came with Cintiq.
If a different type of power adapter is
used, Cintiq will not work properly or may be damaged.
Using a different type of power
adapter also has the potential to result in fire.
Use of a different power adapter will void
your warranty.
C
AUTION
Be sure to use a grounded power source when applying power to Cintiq.
C
AUTION
Do not connect or disconnect the video or power cables while Cintiq or your computer
are turned on;
this may damage the display or computer video card. In this case, Wacom
shall have no responsibility to repair or replace the product.
C
AUTION
This product is for use with a DVI or VGA video card;
using an inappropriate video card
may damage Cintiq.
C
AUTION
Do not block the rear panel ventilation holes;
this may overheat and damage the unit.
When not using Cintiq for long periods of time, unplug the power adapter from the AC
outlet.
W
ARNING
High Voltage. Do not open or disassemble the Cintiq pen display. There is a risk of
electrical shock when the casing is open.
This will also void your warranty and Wacom
shall have no responsibility to repair or replace the product.
W
ARNING
Do not operate the display stand incline adjustment levers when Cintiq is not mounted
on the stand, and do not lift the stand by the adjustment levers;
the stand is spring-
loaded and may cause injury or damage if released without the weight of Cintiq on the stand.
Improper operation may lead to physical injury or damage to the stand.
W
ARNING
When moving Cintiq to a different location, either remove the display unit from the
stand (see page 13 for details) and then move both items separately, use the lock
screws to fix Cintiq to the stand (see page 56 for details), or hold onto both Cintiq and
the stand to make sure that the stand does not separate from the display unit when
moving them together.
Before moving Cintiq, first adjust the stand to its full upright position; this will reduce the
spring tension so that the stand will not accidentally release and snap shut. If the display unit
is in landscape orientation, use one hand to grasp the bottom of the display and with your
other hand grasp the back of the stand. Be sure to lift on both the display and the stand so
that the stand will not separate from the display when moving Cintiq.
If Cintiq is in portrait orientation or has been locked to the stand with the rotation lock screws
(see page 56), the stand will not separate from the display unit and Cintiq can be safely lifted
by grasping the display unit with both hands.
Always follow the instructions on page 13 to remove the display unit from the stand.
W
ARNING
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking
from it;
this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse
immediately with running water for at least 15 minutes or more. If contact is made with the
eyes or mouth, also consult a physician.
Cintiq21UX_Manual.fm Page 3 Monday, November 5, 2007 10:27 AM