Filter
Top Products
79
3.6 System Parameter Setup (Printer Control Panel, 6030/6050)
3.6
System Parameter Setup (Printer
Control Panel, 6030/6050)
The following system parameters can be set up from the printer control panel.
These parameters can be set up on the copier control panel on the Xerox
6030/6050 Copier/Printers. If the parameters are set up on both the printer
control panel and the copier control panel, the most recent settings will take
precedence.
• Refer to "2.2 Printer Control Panel Usage" for detailed instructions on printer
control panel operations.
Menu Item Description
Set Date Sets up the internal clock. The parameters are set in
the order year, month, day, hour, and minutes.
AUTO ROLL Determines whether the automatic paper switching
function from the roll to the tray and tray to the roll is
[ON] or [OFF].
The default setting is [OFF].
SPA PAPER WIDTH Sets the paper width for SP. JIS/ISO A paper. The
default value is [SP A1].
[SP. A1] 620 or 625mm
[SP. A2] 435 or 440mm
Smoothing Determines whether 1200 dpi smoothing will be [ON] or
[OFF]. The default setting is [OFF].
Low power mode1 Sets the time (1 to 120 minutes) that must elapse
following a copy or print job before the machine enters
the Low power mode 1. Low power mode 1 reduces
the temperature of the fuser, decreasing power
consumption.
The default setting is [5] minutes.
Low power mode2 Sets the time (5 to 120 minutes) that must elapse
following a copy or print job before the machine enters
low power mode 2. Low power mode 2 reduces the
fuser temperature more than low power mode 1.
The default setting is [15] minutes.