Filter
Top Products
220
Chapter 5 Additional Operations from the Printer Menu
5.10
Automatic Cut Using the Printer Control
Panel
This section describes how to cut the lead edge of the roll media.
Procedure
1 Select [Media] from the menu displayed on
the printer control panel.
2 Press the < > key.
The level from which the desired media is to
be selected will be displayed.
3 Press the < > key, and then select the roll
that is to have its lead edge cut.
4 Press the < > key.
The level from which the setting is to be
selected will be displayed.
5 Press the < > key and select <Trim>.
6 Press the < > key.
The level from which the number of cuts is
to be selected will be displayed.
7 Press the < > key and select either [1], [2]
or [3].
8 Press the <Set> key.
9 Press the <Set> key.
The lead edge cutting operation will be
started.
Print Settings
Media
Media
Roll1
<> key
Media
Roll2
<> key
Media / Roll2
Type
<> key
Media / Roll2
Trim
<> key
Media / Roll2
Trim : 1
<> key
Media / Roll2
Trim : 2
<> key
Media / Roll2
Trim : 2 *
<Set> key