Filter
Top Products
257
8.2 Poor Image Quality
8.2
Poor Image Quality
Perform the following corrective measures if the copies or prints display one of
the image quality defects listed below.
Image Quality Defect Corrective Measure
The print displays
excessive background
Verify that the image density setting is correct.
Check the quality of the original.
• Reduce the image density setting.
• Increase the background suppression setting.
Some parts of the image
did not print or are
blurred
Verify that the image density setting is correct.
• Change the image density setting.
Determine if the media is damp.
• Switch on the paper heater switch, if it is off.
• Replace the damp media with new media.
• Change the sharpness setting.
Confirm that the size of the document does not
exceed the limit.
• Check the length and width of the document. If
the size exceed the limit, split the document
and copy it in sections.
• Verify that sufficient memory is installed.
The print is wrinkled
Determine if the media is damp.
• Switch on the paper heater switch, if it is off.
• Replace the damp media with new media.