Filter
Top Products
230
Chapter 6 Ethernet Print Service (for UNIX)
AIX 3.2.X
For AIX 3.2.X, register the remote printer in the [/etc/qconfig] file defining the
printer- unique attributes.
• Editing the /etc/qconfig file
In the example below, 6050A called [oklahoma] is registered in the [/etc/qconfig]
file.
With this setting, when you send a file to a printer device called raw, the file is
sent to [oklahoma].
• Starting the Print Queue
After finishing the settings, start the print queue using the qadm command.
Setting the MAC frame format
The Ethernet supports two MAC frame formats [Ethernet V2.0] and [IEEE802.3],
but the Xerox 6030/6050 Wide Format printer system supports [Ethernet V2.0]
only. When setting the MAC frame format in the host computer, specify [Ethernet
V2.0].
For details on the respective operations and content, see "AIX 3.2.X User
Guide.
"
plt10h: Name (Accxes6050A)
host = oklahoma
s_statfilter = /usr/lpd/bsdshort
l_statfilter = /usr/lpd/bsdlong
rq = PLT10H
device = dplt10hdplt10h:
backend = /usr/lpd/rembak
*
plt20h:
host = oklahoma
s_statfilter = /usr/lpd/bsdshort
l_statfilter = /usr/lpd/bsdlong
rq = PLT20H
device = dplt20hdplt20h:
backend = /usr/lpd/rembak
*
Be sure to specify a logical printer prepared in the 6030/6050 Wide Format
printer system using rq.