Filter
Top Products
71
3.2 Communication Parameter Setup (Printer Control Panel, 6030/6050)
1. Select [ON] for [Static Routing], and then
press the <Set> key.
Now press the < > key.
2. Select [ADD] for the [ROUTING TABLE],
and then press the <
> key.
3. Enter the destination address, and then
press the <Set> key.
After setting up the destination address,
move the cursor to the right-hand side
and press the <
> key.
4. Enter the routing address, and then press
the <Set> key.
Serial Setup
1 Display [SERIAL] on the setup item
selection screen, and then press the <
>
key.
2 Select the item that is to be set up with the
use of the <
> and < > keys, and then
press the < > key.
[Handshake], [Baud Rate], [Parity], [Data
Bit], [Stop Bit], [EOP Timeout], [Output
Response], and [Job Separation] will be
displayed in that order.
To return to the previous menu, move
the cursor to the left-hand side and
press the <
> key.
Static Routing
ON *
Adding items to the routing table
ROUTING TABLE
ADD
Dest. Address
123. 000. 000. 000
Router Address
123. 000. 000. 000
PORT SETTING
SERIAL
SERIAL
Baud Rate