Filter
Top Products
189
4.6 Print Services on Web: Status
The following messages are displayed for the IOT status.
Displayed Item Description
Idle The printer is in standby mode, ready to receive a
print job.
Printing The printer is printing.
Warm-up The printer is warming up.
Power off The printer is powered off.
Lower power mode The printer is in the low power mode.
Sleep mode The printer is in the sleep mode.
Machine error An error has occurred in the machine. Simultaneously
press the <> and <> buttons on the printer control
panel. If the machine does not recover, contact your
Xerox Service Representative.
Paper jam Media is jammed inside the printer. Follow the
instructions on the control panel to remove the
jammed media.
Check the printer Follow the instructions on the control panel.
Door / tray open A cover, tray, or door is open. Close it.
No media The printer is out of media. Load the required media.
System error A system error has occurred in the printer. Switch off
the printer power, and then switch it on again. If the
problem does not recover, contact your Xerox
Service Representative.