Filter
Top Products
197
5.2 Printer Control Panel Menu (6030/6050)
5.2
Printer Control Panel Menu (6030/6050)
The following is a list of the menus and submenus which can be accessed by
pressing the <Menu> key and placing the printer in the offline mode. When the
printer enters the offline mode, the first of two top level menus displays, that is,
the [Network Port/Set] menu. From this menu the user can define the system
parameters, perform port (communication) setup, run a test print (plot), manage
job and error logs, set up reprinting (offline plot), and display billing meter
information.
The second top level menu is [Print Setup]. It is accessed from the [Network
Port/Set] item by pressing the [
] key. This menu enables the user to define the
roll and cut sheet media sizes, types, and weights, as necessary, when new or
different media is loaded in the machine.
As a reminder, the following buttons are used to navigate the printer control
panel menus.
< > key
Displays the previous menu item or value on the same
menu level.
< > key
Displays the next menu item or value on the same menu
level.
< > key
Displays the lower level menu item.
< > key Displays the higher level menu item.
Table items that are preceded by an asterisk [*] represent the values that can be
selected. Values which are followed by a [
Ö
] mark lead to another, lower level,
submenu or selection; these are accessed by pressing the <
> key, after
pressing the <Set> key to accept the previous selection.
It is recommended that the procedures covered in this chapter be performed
using Print Services on Web.