Filter
Top Products
18
3 While pulling on the lever located in the end
of the roll paper shaft, remove the paper
core in the direction of the arrow.
4 While pulling the lever located in the end of
the roll paper shaft, align the roll paper with
the paper size marks on the shaft and set
the roll in place.
5 Align the roll paper following the directions
displayed inside the media tray and load the
roll on the shaft guide.
Pulling the lever releases the lock
and allows the roll to be removed
from the shaft.
There is an area at the front of the tray on
which the roll paper can be placed.
Cut the lead edge of the media
before setting it in place if it is
damaged. Refer to
"1.11 Cutting Roll
Media" for details on how to do this.