Filter
Top Products
Xerox Nuvera Paper Guide
3-15
Tips by stock type
Xerox DocuCard
Table 3-22. Xerox DocuCard
Description A Xerox DocuCard is a sheet of paper with an embossed well and a
removable ID card that is attached with adhesive inside of the well. With the
DocuCard Enablement Kit installed, 8.5 x 11 inch, A4, 11 x 17 inch, and A3
size DocuCards can be printed on the iGen3. The ID card dimensions are
2.125 x 3.375 inches (53.975 x 85.725 millimeters).
Selection tips Use the standard DocuCards, which are 8.5 x 11 inch (A4) sheets with a
single ID card, as shown here.
Storage tips Due to their structure, DocuCards are packaged by alternating the stacking
direction every 50 sheets. Cardboard separators are placed between the 50
sheet sets.
• Store DocuCards in unopened boxes until ready to print.
• Place unused DocuCards back into the original packaging, alternating the
direction approximately every 50 sheets.
• Do not leave DocuCard stock in the feeder tray overnight.
Usage tips • Load DocuCards with the ID card facing up.
• Load no more than 50 sheets of DocuCards in the feeder tray.
• If using a Tiltatron, you can load 200 sheets in trays 1 and 2