Filter
Top Products
- 108 -
Maintenance
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Maintenance.fm
CLEANING
Cleaning the scanner’s glass
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:
Cleaning the machine
Dust, dirt and paper debris on the outer surfaces and inside the machine can interfere with machine
performance. Clean the machine regularly.
Caution - Use a soft cloth to clean the machine. Never use abrasive or corrosive detergents.
The fusing assembly can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the machine has been turned off and make sure that the fusing
assembly has cooled before cleaning the interior of the machine.
Cleaning the outside of the machine
Clean the outside of the machine with a smooth cloth.
Open the scanner cover by
pressing the release button (A).
Clean the transparent scanning
glass (B) with a soft lint-free
cloth slightly dampened with
water.
Close the scanning cover.
Make a copy in order to ensure
that the symptoms are gone.
A
B
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 108 Mercredi, 11. août 2004 4:48 16