Filter
Top Products
Safety
- 131 -
Operation
Setting up your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Sécurité.fm
CANADA
This product meets the applicable Industry Canada technical
specifications
NOTICE: The Industry Canada label identifies certified equipment.This certification means that
the equipment meets certain telecommunications network protective, operational and safety
requirements as prescribed in the appropriate machine Equipment Technical Requirements
document(s).The Department does not guarantee the equipment will operate to the users
satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using
an acceptable method of connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect
the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe systems, if present, are connected
together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should contact
the appropriate electric inspection authority, or electrician, as appropriate.
NOTICE: The Ringer Equivalence Number (REN) assigned to each machine device provides an
indication of the maximum number of machines allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalent Numbers of all of the devices does not exceed
5. The Canadian REN value of this equipment is (XXX).
EUROPE
NOTE:
Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, it is
recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster
call setup.
Modification of this product, connection to external control software or to external control
apparatus not authorized by Xerox, will invalidate its certification.
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 131 Mercredi, 11. août 2004 4:48 16