Filter
Top Products
Setting Up Your Machine
- 47 -
Operation Setting up your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Configuration.fm
Manual call pick-up without off-hooking
When a line is idle, you can pick up a line on it manually (L1 or L2) by pressing the
(loudspeaker) key:
Press the key.
Select the line in question (L1 or L2) using the and keys.
Press the again to confirm your selection.
NOTE : If a call is in progress on line L2 (model F116L), only line L1 may be picked up manually. In this
case, the operation requested is performed without using the menu described above.
CALL MONITORING
If only one call is in progress on line 1 (L1) (model F116) or line 2 (L2) (model F116L), the
following is displayed:
If 2 calls are in progress, the on-screen display switches back and forward between the following
on the display’s 2 lines:
and
STOPPING A CALL IN PROGRESS
If only one call is in progress on line L1 or line L2 (model F116L):
Press the key.
Confirm the stopping of the call in progress by pressing the key again.
This screen remains displayed for a maximum of 5 seconds.
If 2 calls are in progress on line L1 and line L2:
Press the key.
Select the line in question (L1 or L2) using the and keys.
Press the key again to confirm.
This screen remains displayed for a maximum of 5 seconds.
L1: called number
TRANS. P1
L1: called number
TRANS. P1
L2: called number
TRANS. P1
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 47 Mercredi, 11. août 2004 4:48 16