Filter
Top Products
- 66 -
Operation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
Caution - If you forget to position the document to be transmitted, the addressee could receive
a blank pages.
NOTE : Since the addressee’s number is generally on the document to be transmitted, you may also dial before
positioning the document.
CHOOSING THE RESOLUTION/CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• Normal mode, no icon appears on the display screen. To be used for good quality documents,
without drawings or small details,
• Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents
with drawings or small characters,
• Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu-
ments with very fine or small character drawings (unless the machine cannot take with it),
• Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra-
phic documents.
To select the resolution mode:
Press key as many times as necessary to select the required mode. A icon on the screen
shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If the document is light, you must
raise the contrast and if it is dark, you must reduce it.
To set the contrast:
Press as many times as necessary to choose the desired contrast, as shown by the position of
a cursor.
DIALING
From the directory
Dialing alphabetically
Enter the first letter of your group dial name with the alphanumeric keypad, then add the
remaining letters until your group dial name is complete.
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 66 Mercredi, 11. août 2004 4:48 16