Filter
Top Products
- 22 -
Installation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Installation.fm
Make sure the On/Off switch is set to 0 (Off).
TELEPHONE AND LAN CONNECTION
It is best that you use direct lines which are reserved for the machine only. This will enable the
machine to operate permanently and to receive communications without needing any user
intervention.
The machine has one standardized telephone socket (model F116) or 2 standardized telephone
sockets (model F116L) to connect it to the telphone network. These sockets are located on the
back left of the machine.
Your installer or Telecommunications Agency will provide all the information you need in
relation to the conditions for connecting your machine to the telephone network.
Connect end G of the telephone line cord 1 to socket A (L1), and the other end to the wall
telephone socket for the first communications line.
Connect end H of the telephone line cord 2 (model F116L) to socket B (L2), and the other end
to the wall telephone socket for the second communications line.
LAN connection. Connect the end of the LAN cable (provided by your network administrator)
to socket C on your machine and the other end to your local network socket.
Key to the diagram:
A: L1 telephone line socket
B: L2 telephone line socket (model
F116L)
C : LAN socket
D : USB port
E : Main Power Receptacle
F : Power cord
G : Line cord L1
H : Line cord L2 (model F116L)
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 22 Mercredi, 11. août 2004 4:48 16