Filter
Top Products
Safety
- 129 -
Operation
Setting up your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Sécurité.fm
January 1, 1996: Council directive 89/336/EEC, approximation of the laws of the member states
related to electromagnetic compatibility.
March 9, 1999: Council Directive 99/5/EEC, on radio equipment and telecommunications
terminal equipment and the mutual recognition of their conformity.
A full declaration of conformity, defining the relevant directives and referenced standards, can be
obtained from your authorized local dealer.
WARNING: In order to allow this equipment to operate in proximity to Industrial Scientific and
Medical (ISM) equipment, the external radiation from the ISM equipment may have to be limited
or special mitigation measures taken.
WARNING: Shielded interface cables must be used with this product to maintain compliance
with Council Directive 89/336/EEC.
FOR FAX FUNCTION
USA
FAX Send Header Requirements:
The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including a Fax machine, to send any message unless such
message clearly contains in a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification of the business or other
entity, or other individual sending the message and the telephone number of the sending machine
or such business, other entity or individual. (The telephone number provided may not be a 900
number or any other number for which charges exceed local or long distance transmission
charges.)
In order to program this information into your FAX machine refer to "Setting the Local ID and
Name " and follow the steps provided. To enter the data and time, please refer to the User Guide.
Data Coupler Information:
WARNING: Ask your local Telephone Company for the modular jack type installed on your
line. Connecting this machine to an unauthorized jack can damage Telephone Company
equipment. You, not Xerox, assume all responsibility and/or liability for any damage caused by
the connection of this machine to an unauthorized jack.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for machine Attachments (ACTA). On the rear of this equipment is a
label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 129 Mercredi, 11. août 2004 4:48 16