Filter
Top Products
- 80 -
Operation
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Utilisation.fm
Machine settings
Paper
Select the type of paper NORMAL or THICK with keys or .
Confirm your setting by pressing key OK.
NOTE : 1) When the THICK type of paper is selected, the printing speed is slowed down.
2) Use the manual feeder for paper substances over 24 lb. (90 g/m²).
Paper tray
Select the paper tray to be used (AUTOMATIC, LOWER or UPPER) using keys or .
Confirm your setting by pressing key OK.
Margins
If you want to shift the side margins of your document to the left or to the right:
Adjust the left / right margin shift (in steps of 0,02 in (0.5 mm)) by means the or keys.
Press OK to confirm.
OTHER FUNCTIONS
LOGS
The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30 transmissions. However, you may request a print
out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the incoming or outgoing document,
• group dial number or E-mail address,
• transmission mode (Norm, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted
CORRECT if properly transmitted
or
information codes for special calls (polling, manual group dial, etc.),
• reason for call error (example: your group dial does not answer).
MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 80 Mercredi, 11. août 2004 4:48 16