Filter
Top Products
43
QL Series User Guide
Using the Accessories
Belt Clip
Refer to Figure 15. All QL Se-
ries printers are equipped with a
belt clip as standard. To use:
hook the clip over your belt, and
ensure that the clip is securely
attached to the belt. The belt
clip will pivot to allow you to
move freely while wearing the
printer.
The retainer for the Belt Clip
has a strain relief feature which
can be used with the communi-
cations cable. Refer to the sec-
tion on Connecting the Printer.
Kickstand
Refer to Figure 16 . The Kickstand option allows users to use
the printer on a desktop. To use the optional Kickstand: Flip
the Kickstand on the back of the printer open until you feel a
slight detent. The printer will now sit at approximately a 30º to
45° angle on a desktop depending on the printer model.
The retainer for the
Kickstand has strain
relief features which
can be used with the
communications ca-
ble. Refer to the sec-
tion on Connecting
the Printer.
continued
Clip printer
to belt
Printer can
pivot freely
Figure 16: Using the Kickstand
Figure 15: Using the Belt Clip